6
ASSEMBLY TOOLS
ASSEMBLY
UNPACKING THE UNIT
1. 1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted
Line. Lift Box over the unit and unpack.
2. 2. Carefully remove all parts from carton and inspect for any damage or missing parts. If
damaged parts are found, or parts are missing, contact your dealer immediately.
3. 3. Locate the hardware package. The hardware is separated into steps. Remove the
tools first. Remove the hardware for each step as needed to avoid confusion.
#108. Combination M5 Allen Wrench
& Phillips Head Screw Driver (1 pc)
#110. 12m/m Wrench ( 1pc)
#111. 13/14m/m Wrench ( 2pcs)
To Next Page
Loading...
Need help?
General
