4
IC Clip Cable: A chip clip to read & write
EEPROM chip without sealing-off the chip
from the module. Please check “How to
use – EEPROM” for more information on
using this clip & cable set.
5
Color Cable: Could be connected to 26-pin
connector and used to jump wires for
reading & writing data on modules.
6
DuPont Cable: Separated cables for multi-
purposes, like jumpers, read data, etc.
7
Mercedes IR Key emulator: Used to read
& collect EIS/EZS data on Mercedes-Benz
key programming process.
To Next Page
Loading...
