VESDA by Xtralis
VESDA Accessories Guide
3 Remote Mounting Options
3.1 Remote Box
The remote box can house a single module with a termination card. The remote box offers the option to mount
modules at site specific locations. The remote mounting option is normally exercised where there is a need to
monitor and/or manage a stand alone detector, or one connected to VESDAnet, from a remote location.
Figure 3-1: Remote Unit
Table 3-1: Remote Unit Configurations
Product Name No. of Relays Product Code
Remote Programmer Unit 0 VRT-100
Remote VESDA VLP Display Unit 7 VRT-200
VESDA VLP Remote Display Without Relays 0 VRT-600
Remote VESDA VLS Display Unit 7 VRT-400
Remote VESDA VLS Display without Relays 0 VRT-700
Remote VESDA VLS Display 12 RTC 12 VRT-800
Remote VESDA VLC Display RTC0 0 VRT-K00
Remote VESDA VLC Display RTC7 7 VRT-J00
Remote VESDA VLF Display without Relays 0 VRT-W00
Remote VESDA VLF Display Unit 7 VRT-V00
Remote VESDAnet Socket Unit 0 VRT-300
System Relay Module 7 VRT-S07
Non Scan 7 relay processor Only 7 VRT-500
12 RTC Processor Only Remote 12 VRT-900
AOM 0 VRT-A10
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...
