VESDA Accessories Guide
VESDA by Xtralis
4.4 Remote Termination Card
The remote termination card is available with 7 relays or 12 relays. The remote termination card is used when
there is a requirement for reporting and/or triggering an external device, through a fire alarm control panel that
is located away from the detector. The remote termination card copies the attributes of the head termination
card of the detector to which it is assigned. It can also be programmed to provide remote relay assignments
that are different to those of the assigned detector.
Figure 4-7: Remote Termination Card
4.4.1 Features of Remote Termination Card
l 7 programmable relays (or 12 relays for VLS)
l The default values for the relays correspond to respective default values for 7 and 12 Relay Head
termination cards. The remote termination card does not have GPI Function.
l Can be wired to a secondary reporting device (e.g. a sounder or a beacon)
l Comprehensive reporting and system management using PC based software or the LCD Programmer
l Option for recessed mounting
l Interfaces with all existing VESDA devices
4.4.2 Operation of the Remote Termination Card
The remote termination card is housed in the remote box or the 19” Subrack. The remote termination card
provides the terminals for VESDAnet and power supply to the relay processor card.
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...
