Xtralis VESDA - 19 Subrack

VESDA by Xtralis
VESDA Accessories Guide
3.2 19" Subrack
The 19” Subrack is used for grouping up to 4 Remote modules. The 19 in. subrack assembly is used when
multiple modules are required to be located in standard 19 in. racks. An optional wall mounting bracket is
available for a single 19 in. Subrack.
Table 3-2: 19” Subrack Modules
Product Name No. of Relays
Module
Number
Blank Plates 0 0
LCDProgrammer 0 1
VESDA VLP Display 7 2
VESDAnet Socket 0 3
VESDA VLS Display 7 4
(DRP) 7 Relay Remote Termination Card 7 5
VESDA VLP Display (no relays) 0 6
VESDA VLS Display (no relays) 0 7
VESDA VLS Display 12 8
(DRP) 12 Relay Remote Termination Card 12 9
VESDA VLC Display with Relays 7 J
VESDA VLC Display (no Relays) 0 K
VESDA VLF Display with Relays 7 V
VESDA VLF Display (no relays) 12 W
3.2.1 Product Information
The front section of the 19” Subrack (VSR-6610) houses the relevant VESDA module.
Table 3-3: 19” Subrack Front View
Legend
A Mounting Holes
B Front Section
Figure 3-3: 19"Subrack - Isometric View
The back section of subrack houses the remote termination cards or the VESDAnet socket card.
www.acornfiresecurity.com
www.acornfiresecurity.com