Xtreamer Pro User Manual

English
91
11. How to use “HDD A-B Switch”
11-1 How to back up and copy/move data through “USB Slave”
1. Check whether there is 1 or 2 HDD in Xtreamer Pro.
2. Divert the “A-B switch” button pertaining to the same HDD side.
Switch
3. . Connect USB Slave cable to the power terminal in order to connect to the PC.
4. After turning the power on automatically, the selected HDD will be connected; and it will take
about 1 minute to reboot.
Note
If the “A-B switch” button isn’t properly diverted pertaining to the same HDD side, hard drive in
My Computer won’t be recognized. Therefore you must place “A-B switch” button pertaining to the
same side. (refer to the above image)
5. In the case of connecting to the other side of HDD tray, use the “Safely remove hardware”
option, and then divert the “A-B switch” button to the other HDD tray side so that HDD-recognition
will be smoothly performed.
From switch standpoint
USB Slave
Advanced Users Guide
Switch
A/B
Switch

Xtreamer Pro Specifications

General

Brand	Xtreamer
Model	Pro
Category	Media Player
Language	English