What does alarm code A06 mean on my Xylem Water Pump?
If your Xylem Water Pump shows alarm code A06, it indicates an external temperature probe malfunction. Check the probe and the connection to the pump.
Why is my Xylem ecocirc XL Water Pump reducing speed automatically (A03)?
If your Xylem Water Pump is automatically reducing speed and displaying alarm code A03, it's doing so to prevent the inverter from overheating. Check installation conditions and rectify status of the system.
What does alarm code A02 mean on my Xylem ecocirc XL?
If your Xylem Water Pump shows alarm code A02, it indicates a high temperature of the fluid. Check water temperature value.
Why is my Xylem Water Pump in Remote Off mode?
If your Xylem Water Pump is in Remote Off mode, it means that remote communication is deactivated. If the communication does not work, check the connection and the configuration parameters for communication on the external controller.
How do I check the power on my Xylem ecocirc XL Water Pump?
Check the power supply and ensure that it is properly terminated to the Xylem Water Pump power.
What does "ALOC" on my Xylem ecocirc XL display mean?
If your Xylem Water Pump display shows "ALOC", it means the rotor unlocking function is in progress. Wait for the result of this procedure, which usually takes about 30 seconds. If the procedure fails, error code E04 will appear.
How to troubleshoot a Xylem ecocirc XL Water Pump that has no power?
If your Xylem Water Pump isn't powering on, begin by checking the power connection to ensure it's properly connected. Also, verify the power supply and circuit breaker to rule out a power failure.
What does it mean when my Xylem ecocirc XL Water Pump displays error E04?
If your Xylem Water Pump displays error code E04 and does not start, it indicates a motor stall. Restart the pump.
What does error code E03 mean on a Xylem ecocirc XL?
If your Xylem Water Pump displays error code E03 and doesn't start, it indicates DC Bus overvoltage, suggesting excessive power. Confirm the system setup and verify the correct position and operation of check valves.
Why does my Xylem Water Pump's thermal protection trigger quickly?
If your Xylem Water Pump starts but the thermal protection is triggered shortly after, it could be due to several reasons: * Incorrect wiring size or a circuit breaker rating that's not suitable for the motor current. Check and replace the components as necessary. * Thermal overload protection due to excessive input. Check the pump's working conditions. * A missing phase in the power supply. Verify continuity and ensure proper wiring connections.
Explains hazard levels, symbols, and categories for safe operation.
Guidelines for emissions and waste disposal according to local regulations.
Warning about using only original spare parts for replacements.
Steps to inspect the package and product for damage or missing items.
Instructions for positioning, fastening, and precautions during transport.
Recommendations for storage location, temperature, and humidity.
Describes the ecocirc XL as a wet rotor pump with energy-efficient motor.
Explains the naming convention for ecocirc XL pump models.
Lists detailed specifications like voltage, frequency, IP protection, and temperature ranges.
Provides sound pressure levels for different nominal pump HP.
Lists items included in the package with the pump unit.
Lists optional accessories available for the ecocirc XL pumps.
Safety warnings and guidelines for lifting and handling the pump.
Lists necessary tools for installing the pump.
Guidelines and warnings for selecting a suitable pump installation location.
Table detailing required inlet pressure based on fluid temperature.
Table showing power draw decrease based on temperature.
Precautions and checklist for correct piping installation.
Checklist for electrical supply, grounding, and wire specifications.
General steps for installing the pump, including orientation and insulation.
Detailed steps for rotating the motor housing for better access.
Precautions and steps for electrical connections, including grounding.
Instructions for connecting the power supply to the pump's terminal box.
Steps for connecting input/output wires to the terminal blocks.
Guidelines for wiring, cable types, and specific connections for pumps.
Overview of the pump's user interface, buttons, and display elements.
How to lock and unlock the user interface for safety and convenience.
Introduces main pump functions and control modes selectable via interface or I/O.
Details on Constant pressure, Proportional pressure, and Fixed speed modes.
Explains modes like Δp-T, T-Constant, and ΔT constant.
Description of the energy-saving night mode function.
How to start or stop the pump using external dry contacts or relays.
Using a 0-10 V analog input to control pump speed or mode.
Information about dry relay contacts for status indication.
Specifics of signal relays for three-phase pump status.
Setup for optional differential pressure and temperature sensors.
Details on RS-485 communication for BMS integration.
Information on the optional wireless module for control.
Configuration for backup, alternate, and automatic parallel operation.
Methods to configure pump settings via UI, bus, or wireless.
Steps to adjust baud rate, protocol, address, and module type.
How to change the pump's operating mode using the user interface.
Procedure to adjust the desired set point for pump operation.
How to switch between different units for displayed parameters.
Methods for starting and stopping the pump manually or via command.
Explains the automatic air venting process and how to recall/skip it.
Steps to configure two pumps for parallel operation.
How to set backup, alternate, or parallel modes for two pumps.
Explains how alarms and errors are displayed on the interface.
Recommends periodic inspections to check for potential pump problems.
Lists display messages for normal operation and status lights.
Details fault codes, their causes, and solutions for Red LED indicators.
Lists alarm codes, their causes, and solutions for Orange LED indicators.
Specific faults like "pump does not start" and their remedies.
Information on the license agreement for embedded software.
General| Insulation Class | F |
|---|---|
| Frequency | 50/60 Hz |
| Power Supply | 230 V, 50/60 Hz |
| Motor Type | ECM |
| Motor Protection | IP42 |
| Control Modes | Constant speed |
| Connections | Flange |
To Next Page