Xylem Flygt 2008 Ready 8S - 6.5 Replace the motor cable; 6.5.1 Remove the motor cable

6.5 Replace the motor cable
6.5.1 Remove the motor cable
1. Loosen the cable entry.
WS003053A
2. Remove the pump top.
3x
WS003054A
3. Disconnect the motor cable from the terminals:
a)
Disconnect the power lead(s).
b) Disconnect the ground (earth) lead(s).
4. Remove the motor cable.
6 Maintenance
28 2008 Ready 8, 8S Installation, Operation, and Maintenance