Xylem Flygt 2008 Ready 8S User Manual

WS003055A
6.5.2 Install the motor cable
1. Pull the cable through the pump top.
WS003057A
2. Connect the terminals. See Make the electrical connections on page 13.
If the cable is damaged, then cut off the damaged part and install new terminals.
a) Connect the ground (earth) lead(s).
b) Connect the power lead(s).
3. Install the pump top.
6 Maintenance
2008 Ready 8, 8S Installation, Operation, and Maintenance 29

Xylem Flygt 2008 Ready 8S Specifications

General

Brand	Xylem
Model	Flygt 2008 Ready 8S
Category	Water Pump
Language	English