2 Transportation and Storage
2.1 Examine the delivery
2.1.1 Examine the package
1. Examine the package for damaged or missing items upon delivery.
2. Record any damaged or missing items on the receipt and freight bill.
3. If anything is out of order, then file a claim with the shipping company.
If the product has been picked up at a distributor, make a claim directly to the
distributor.
2.1.2 Examine the unit
1. Remove packing materials from the product.
Dispose of all packing materials in accordance with local regulations.
2. To determine whether any parts have been damaged or are missing, examine the
product.
3. If applicable, unfasten the product by removing any screws, bolts, or straps.
Use care around nails and straps.
4. If there is any issue, then contact a sales representative.
2.2 Transportation guidelines
Precautions
WARNING:
• Observe accident prevention regulations in force.
• Crush hazard. The unit and the components can be heavy. Use proper lifting methods
and wear steel-toed shoes at all times.
Check the gross weight that is indicated on the package in order to select proper lifting
equipment.
Position and fastening
The unit must be transported only in its horizontal position as indicated on the package.
Make sure that the unit is securely fastened during transportation and cannot roll or fall
over. The product must be transported at an ambient temperature from -10°C to 70°C
(14°F to 158°F) with a non-condensing humidity of <95% and protected against dirt, heat
source, and mechanical damage.
2.3 Storage guidelines
2.3.1 Storage location
NOTICE:
• Protect the product against humidity, dirt, heat sources, and mechanical damage.
• The product must be stored at an ambient temperature between 10°C and 70°C (14°F
and 158°F) and a non-condensing humidity below 95%.
• The converter uses electrolytic capacitors which can deteriorate when not used for a
long period of time. If storing for a year or more, make sure to run them occasionally to
prevent deterioration.
2 Transportation and Storage
6 ResiBoost INSTRUCTION MANUAL