Yaber V2 Instruction Manual

On your iOS device, tap [Settings] -[Wi-Fi] -Turn [Wi-Fi] ON. Available
networks are shown.
Choose the WiFi name like [RKcast-xxxxxx], Connect it and enter the
password [12345678] which is on the Projector’s menu.
Step 1
Method 2: AP-Use cellular network from your mobile phone card.
②Tap WiFi AP -- Scan-- Select your WIFI--enter your WiFi’s password--Tap
Connect
Open Control Center- Tap the Screen Mirroring button-Connect
[RKcast-xxxxxx]
① Open control center.
② Tap on Screen Mirroring-Select the Device name [RKcast-xxxxxx]
Step 3
YABER
support01@yaberauto.com
EN
09

Yaber V2 Specifications

General

Lamp Life	100, 000 Hours
Connectivity	HDMI, USB, VGA, AV, Audio Out
Aspect Ratio	4:3/16:9
Resolution	1280x720P (Native)
Maximum Supported Resolution	1920x1080P