Yaber V2 Instruction Manual

Thanks
Thank you very much for purchasing the YABER V2 projector.
Please read this instruction manual carefully before use. Also, please
keep it handy so you can check it at any time.
If in doubt, do not hesitate to contact support01@yaberauto.com.
We can provide after-sales service until satisfaction.
Remote control
Replace the remote control battery
1. Push to open the battery cover.
2. Remove both old batteries and install new ones (AA). Make sure that
the polarity of the batteries (+/-) is correctly aligned.
(Batteries not included)
IR Transmitter
Power
Input Source Menu
OK
Move Left Move Right Move Up Move Down
Return
Volume Down Volume Up
Mute
support01@yaberauto.com
EN
04

Yaber V2 Specifications

General

Lamp Life	100, 000 Hours
Connectivity	HDMI, USB, VGA, AV, Audio Out
Aspect Ratio	4:3/16:9
Resolution	1280x720P (Native)
Maximum Supported Resolution	1920x1080P