Yaesu FT-100D User Manual

G) OWN Button
Microphone Switches
YAESU
CONDENSER MIC
MH-42
Note: P, P1, and P2 button functions
can be changed via the
MENU system.
Seepage
37.
Press this button to tune downward in the current step increment, hold this button in to
start scanning toward a lower frequency.
® UP Button
Press this button to tune upward in the current step increment, hold this button in to
start scanning toward a higher frequency.
@PTTSwitch
Press this switch to transmit, and release it to receive.
@ ACC Button (HOME)
Pressing button key recalls a favorite "HOME" frequency memory.
@ P Button (VFO/MR)
Pressing this button switches frequency control between the VFO and Memory Sys-
tems.
® LOCK Switch
Slide this switch upward to lock (disable) the microphone buttons.
(j) P1 Button (BAND Down)
Pressing this button will cause the frequency to be switched to the next-lowest band.
® P2 Button (BAND UP)
Pressing this button will cause the frequency to be switched to the next-highest band.
FT-IOO MICRO MOBILE OPERATING MANUAL 29

Yaesu FT-100D Specifications

General

Product type	Portable CB radio
Product color	Black
Housing material	-
Display type	LCD
Output power	100 W
AM band range	5.2 - 18 kHz
FM band range	15 - 25 MHz
Frequency range	0.1 - 961 MHz
Channels quantity	50 channels
Compatible products	ATAS-120\\tActive-Tuning Antenna System FC-20\\tAutomatic Antenna Tuner YSK-100\\tSeparation Kit XF-117CN\\t300Hz CW Filter MH-36B6JS\\tDTMF Microphone FTS-27\\tCTCSS Tone Decoder Unit
Microphone included	Yes
Input voltage	13.8 V

Weight and Dimensions

Depth	205 mm
Width	160 mm
Height	54 mm