Need help?Do you have a question about the Yaesu FT-107M and is the answer not in the manual?
General| Type | HF Transceiver |
|---|---|
| RF Power Output | 100 W |
| Voltage | 13.8 V DC |
| Modes | SSB, CW, AM |
| Receiver Sensitivity | 0.25 μV for 10 dB S+N/N (SSB) |
| Tuning Steps | 1 kHz |
Provides an overview of the FT-107M's features and design.
Details the technical parameters and performance characteristics of the FT-107M.
Lists the semiconductor components used in the FT-107M.
Explains the function of each control and switch on the front panel.
Describes the various connectors and ports located on the rear of the transceiver.
Lists optional accessories that enhance the FT-107M's functionality.
Details the wiring and pin assignments for microphone interfaces.
Illustrates how the FT-107M connects with other Yaesu equipment.
Provides instructions for setting up and installing the FT-107M for operation.
Guides the user through the basic procedures for operating the FT-107M.
Lists the part numbers and compatibility for various internal units of the FT-107M.
Explains signal flow through block diagrams for understanding operation and troubleshooting.
Details the frequency conversions and relationships within the transceiver circuitry.
Provides data on the crystals used for various functions and bands.
To Next Page
