Yale Conexis L1 - Adding Remote Fobs

27
Adding Remote Fobs
•
All remote fobs you wish to add need to be added at the same
time in step 4 (maximum of 5)
(21)
Press “R”
3 times
“Connecting to a home automation system is a two way process and may require the
compatible home automation system to be configured to look for a new device, please
consult the manual that came with the system for more information.
Pairing with a third party gateway.
3
1
2
1
3
2
Insert
Connection
Module
Remote Fob Module Remote Fob
Parts Required
1
2
3
Press ‘R’
4
Press and hold top right
and bottom left buttons
until a solid red light
appears on the fob. The
lock will then beep once.
Release buttons.
5
Press ‘R’
(19)
“Beep beep beep”
Locking
Checking