Yale Luna Pro+

1.6 Reversing handing direction (if needed)
5 . Cover plate
5 . Round head screws (M4)
for securing cover plate
4
6
. Decorative
panel (left)
2 . Decorative
panel buckle
6 . Decorative
panel buckle
8 . Handing fixing
screws (M4)
3 . decorative panel and cover plate
9 10
If you need to change the door opening direction due to ie. changing of the door,
you will need to reverse the door handing direction.
Step 1. Unscrew the handing fixing screws and the cover plate screw at the back of the front
body.
Step 2. Push out the decorative panel from the buckle.
Step 3. Disassemble the decorative panel and cover plate.
Step 4. Slide the handle to the opposite position.
Step 5. Secure the cover plate with round head screw (M4).
Step 6. Ensure the decorative panel is secured into the decorative panel buckle.
Step 7. Secure the corresponding decorative panel with round head screw (ST2.9)
Step 8. Secure the handing fixing screws (M4)
1 . round head
screws (ST2.9)
1 . round head
screws (M4)
1 . round head
screws (M4)
7 . round head
screws ST2.9