Yale Luna Pro+

Step 1. Make hole on the door according to the template provided, insert mortise into door
panel.
Step 2. Ensure the mortise cable is pulled out gently to the interior side of the door
through the top hole.
Step 3. Secure the mortise with the two mortise screws.
Step 1. Pull through the front body cable assembly through the top hole as shown in the
picture
Step 2. Align the positioning plug and threaded pull tube to the respective holes, and
ensure the front body gasket is tightly secured on the door panel.
2.1 Mortise installation
2.2 Front body installation
Mortise cable assembly
Exterior Interior
Exterior Interior
1
3
2
Mortise screw
Product installation
13 14
1
2