Nameplate
WARNING
Any change to the lift truck or its equipment can
change the lifting capacity. If the Nameplate does not
show the maximum capacity, or if the lift truck equip-
ment, including the battery, does not match that shown
on the Nameplate, then the lift truck must NOT be oper-
ated.
The Nameplate for the lift truck is found on the frame. The
capacity shown is for a lift truck equipped as shown on the
nameplate. The capacity is specified in kilograms (kg). The
capacity is the maximum load that the lift truck can handle
for the load condition shown on the Nameplate. See Fig-
ure 3.
The maximum capacity for the lift truck must be shown on
the Nameplate. If the lift truck Nameplate already has a
capacity for special load handling equipment, it will be lis-
ted. Make sure the Nameplate data is complete and fully
understood before operating the lift truck.
The lift truck serial number code is on the Nameplate. The
serial number code is also stamped on the lift truck frame.
Figure 3. Nameplate and Label
Safety Labels
Safety labels are installed on the lift truck to give informa-
tion about possible hazards. It is important that all safety
labels are installed on the lift truck and can be read. See
Figure 4.
Model Description
10
To Next Page
Loading...
Need help?
General
