Table 1. Instruments and Controls (See Figure 5) (Continued)
Item
No.
Item Function
1 Selectable Performance Modes The user has a choice of three performance modes that are selectable
through the control handle. The mode selection is made at startup, or key
ON. Performance parameters that vary are: Acceleration, Deceleration (neu-
tral braking), and Top Travel Speed.
The three user selectable performance modes are factory programmed per
the following:
Mode 1: Soft Acceleration
Acceleration - Soft
Top Speed - 90% of full speed
Neutral Braking - Soft
Mode 2: Medium Acceleration
Acceleration - Medium
Top Speed - 90% of full speed
Neutral Braking - Medium level
Mode 3: Maximum Acceleration
Acceleration - maximum
Top Speed - 100% of full speed
Neutral Braking - Maximum
Model Description
16