Table 1. Instruments and Controls (See Figure 5) (Continued)
Item
No.
Item Function
5 Battery Indicator/Hourmeter
Diagnostics and Fault Codes
NOTE: Fault codes may be generated
in response to extreme operating con-
ditions such as rapid stops, potholes,
or severely discharged battery, there-
fore disabling the truck. Most fault
codes may be reset by turn the key
switch OFF, then returning to the ON
position. If the fault code will not reset,
report the fault immediately.
A combination hourmeter, battery state of charge, and fault indicator is pro-
vided on this lift truck and includes a diagnostic fault code display. The hour-
meter continually displays total operation hours when the key switch is ON
and current is flowing. Periodic maintenance recommendations are based
on these operating hours.
At 80% of discharge, an LED will flash, indicating energy reserve.
The discharge indicator is programmed for use with a flooded cell battery.
Refer to the maintenance manual for use with a maintenance-free battery. A
fault indicator is also included. The red LED wrench symbol and a fault mes-
sage are displayed if fault occurs. For information about the diagnostics and
fault codes, reference the maintenance manual.
Model Description
25
To Next Page
Loading...
Need help?
General
