Yale YD-01-CON-ZW-CH User Manual

Getting Started
11
Set a One Day Code
The one day code is a code that will automatically expire after 24 hours. This allows short term access to be
granted to someone.
Enter the master code,
followed by # key
You are now in the lock’s menu,
choose option number [5] to
enter the one day code settings
If you have forgotten the master
code please see the resetting
the lock section of the manual
(Page 25)
Touch the keypad with
the palm of your hand
Touch the keypad to begin
Select the [5] button
followed by # key
The user code must be 4 digits
Enter the new user code
The code will now be active for
24 hours
2 tone beep
2 tone beep after each
button pressed
Press # to complete
2 tone beep
3 tone ascending beep
followed by your new
code being illuminated
Keypad will illuminate
followed by 2 tone beep
Delete a One Day Code
A one day code can be deleted if it is no longer wanted. If not, it will automatically expire at the end of the 24 hour period.
Enter the master code,
followed by # key
You are now in the lock’s menu,
choose option number [5] to
enter the one day code settings
If you have forgotten the master
code please see the resetting
the lock section of the manual
(Page 25)
Touch the keypad with
the palm of your hand
Press any button on the
keypad to begin
Select the [5] button
followed by # key
Press the # to confirm code
deletion
Press # to complete
2 tone beep
2 tone beep after each
button pressed
3 tone ascending beep
Keypad will illuminate
followed by 2 tone beep
Step Icon Expected Feedback Description
Step Icon Expected Feedback Description

Yale YD-01-CON-ZW-CH Specifications

General

Brand	Yale
Model	YD-01-CON-ZW-CH
Category	Locks
Language	English