10
Delete a User Code
Enter the master code,
followed by # key
You are now in the lock’s menu,
choose option number [2] to
select the user code setup
If you have forgotten the master
code please see the resetting
the lock section of the manual
(Page 25)
Touch the keypad with the
palm of your hand
Touch the keypad to begin
Select the [2] button followed
by # key
Option number [3] deletes
a user code
Press the [3] button and
then #
This is the number of the slot in
memory where the code will be
saved (1-20)
To stop a user having access their code will need to be deleted. Before doing this you will first need to know which slot
in the locks memory their code is in. Please see the User Code Log at the back of the guide.
Step Icon Expected Feedback Description
2 tone beep
2 tone beep after each
button pressed
Enter the slot number for the
user code
2 tone beep after each
button pressed
3 tone ascending beep
Keypad will illuminate
followed by 2 tone beep
Press # to complete
3 tone ascending beep
The user code will now be
deleted from the lock
To Next Page
Loading...
Need help?
General