20
Connecting to a Home Automation System
Enter the master code,
followed by # key
You are now in the lock’s menu,
option [4] contains the home
automation settings
If you have forgotten the master
code please see the resetting
the lock section of the manual
(Page 25)
Touch the keypad with the
palm of your hand
Touch the keypad to begin
Press the [4] button
followed by # key
This will make the lock look for
a compatible system. If the lock
makes an error beep it may need
disconnecting first. Follow steps
on Page 21
Press the [1] button
followed by the # key
The lock will now be linked to the
home automation system
For more information on how to connect your smart door lock to a Yale system go to
www.yale.co.uk/YaleEcoSystem.
For other home automation systems please follow their instructions on adding a lock and when prompted follow the
instructions below.
Step Icon Expected Feedback Description
2 tone beep
2 tone beep after each
button pressed
Please wait up to 60 seconds
2 tone beep after each
button pressed
3 tone ascending beep
Smart Home
Keypad will illuminate
followed by 2 tone beep
To Next Page
Loading...
Need help?
General