EVENT CODE TABLE
9-11
EAS20164
EVENT CODE TABLE
No. Item Symptom Possible cause Remarks
192 Intake air pressure sen-
sor
Brief abnormality de-
tected in intake air pres-
sure sensor
Same as for fault code
number 13
Perform the checks and
maintenance jobs for
fault code number 13.
193 Throttle position sensor Brief abnormality de-
tected in throttle posi-
tion sensor
Same as for fault code
number 15
Perform the checks and
maintenance jobs for
fault code number 15.
195 Sidestand switch Brief abnormality de-
tected in black/red input
lead of ECU
Same as for fault code
number 19
Perform the checks and
maintenance jobs for
fault code number 19.
196 Coolant temperature
sensor
Brief abnormality de-
tected in coolant tem-
perature sensor
Same as for fault code
number 21
Perform the checks and
maintenance jobs for
fault code number 21.
197 Intake air temperature
sensor
Brief abnormality de-
tected in intake air tem-
perature sensor
Same as for fault code
number 22
Perform the checks and
maintenance jobs for
fault code number 22.
203 Lean angle sensor Brief abnormality de-
tected in lean angle
sensor
Same as for fault code
number 41
Perform the checks and
maintenance jobs for
fault code number 41.
240 O
2
sensor
(Correction value re-
mains at upper limit)
Correction value re-
mains at upper limit
during O
2
feedback
• Open or short circuit
in the wire harness
between the sensor
and the ECU
Gy/G–Gy/G
P/B–P/B
B/L–B/L
• Low fuel pressure
• Clogged fuel injector
• Sensor malfunction
• Defective ECU
• Defective fuel injec-
tion system
• If a fault code is indi-
cated, perform the
checks and mainte-
nance jobs for the
fault code first.
* Event code number
240 may be indicated
even if the system is
normal.
241 O
2
sensor
(Correction value re-
mains at lower limit)
Correction value re-
mains at lower limit dur-
ing O
2
feedback
• Open or short circuit
in the wire harness
between the sensor
and the ECU
Gy/G–Gy/G
P/B–P/B
B/L–B/L
• Low fuel pressure
• Clogged fuel injector
• Sensor malfunction
• Defective ECU
• Defective fuel injec-
tion system
• If a fault code is indi-
cated, perform the
checks and mainte-
nance jobs for the
fault code first.
* Event code number
241 may be indicated
even if the system is
normal.
To Next Page
Loading...
