CVP-509/505/503/501 Reference Manual 101
Utility – Making Global Settings –
11
Custom Reset—Saving and Recalling Your Original Settings as a Single File
For the items below, you can save your Original Settings as a Single File for future recall.
1 Make all desired settings on the instrument.
2 Call up the operation display.
[FUNCTION] → [J] UTILITY → TAB [E][F] SYSTEM RESET
3 Press one of the [F]–[I] buttons to call up the relevant display for saving your data.
4 Use the TAB [E][F] buttons to select one of the tabs (other than the PRESET) to
which your settings will be saved.
5 Press the [6 ▼] (SAVE) button to save your file.
6 To recall your file, press the desired [F]–[I] buttons in the SYSTEM RESET display,
then select the desired file.
[F] SYSTEM
SETUP FILES
Parameters set on the various displays such as the [FUNCTION] → [J]
UTILITY and microphone setting display (CVP-509/505/503) are han-
dled as a single System Setup file. Refer to the Data List for details on
which parameters belong to the System Setup.
[G] MIDI SETUP
FILES
The MIDI settings including the MIDI templates on the USER tab dis-
play are handled as a single file.
[H] USER EFFECT
FILES
The User Effect settings including the user effect types, user master EQ
types, user master compressor types (CVP-509), and user vocal harmony
types (CVP-509/505/503) created via the Mixing Console displays are
managed as a single file.
[I] MUSIC
FINDER FILES
All the preset and created records of the Music Finder are handled as a
single file.
To Next Page