CVP-509/505/503/501 Reference Manual 71
Mixing Console – Editing the Volume and Tonal Balance –
8
Editing TUNE Parameters
[A]/[B]/
[F]/[G]
PORTAMENTO
TIME
Portamento is a function that creates a smooth transition in pitch from the
first note played on the keyboard to the next. The Portamento Time deter-
mines the pitch transition time. Higher values result in a longer pitch
change time. Setting this to “0” results in no effect. This parameter is
available when the selected keyboard part is set to Mono.
[C]/[H] PITCH BEND
RANGE
Determines the range of the PITCH BEND for each keyboard part (when
a pedal is assigned to this function; page 86). The range is from “0” to
“12” with each step corresponding to one semitone.
[D]/[I] OCTAVE Determines the range of the pitch change in octaves, over two octaves up
or down for each keyboard part.
[E]/[J] TUNING Determines the pitch of each keyboard part.
[1 ▲▼]–
[3 ▲▼]
TRANSPOSE Allows you to set transposition for overall sound of the instrument
(MASTER), Song playback (SONG), or the keyboard pitch (KEY-
BOARD), respectively.
To Next Page
Loading...
