Yamaha AG03MK2 - Page 68

(
USB audio
(
2 IN / 2 OUT
USB Audio Class 2.0 compliant, Sampling frequency: up to 192 kHz, Bit depth: 24-bit
(
Phantom power voltage
+48 V
(
FOOT SW
REVERB ON/OFF or MUTE (CH 1) ON/OFF
(
Power requirements
DC 5 V, 900 mA
(
Power consumption
Max. 4.5 W
(
Dimensions (W × H × D)
152 mm × 63 mm × 201 mm (6.0" x 2.5" x 7.9")
(
Net weight
0.9 kg (2.0 lbs.)
(
Included accessories
USB 2.0 cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI
Download Information
(
Optional accessories
Foot switch: FC5, Mic stand adaptor: BMS-10A
(
Operating temperature
0 to +40 ℃
AG03MK2
0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω
All level controls are nominal if not specified.
(
Frequency response
(
Input (MIC) → MONITOR OUT via USB IN/OUT
+0.5 dB/−1.5 dB (20 Hz to 48 kHz @ Fs = 192 kHz) with a nominal output level reference @ 1 kHz, GAIN
knob: min, STREAMING OUT: DRY CH 1-2G
(
Total harmonic distortion*1 (THD+N)
(
Input to MONITOR OUT
0.05 % @ 0 dBu (20 Hz to 20 kHz), GAIN knob: min
0.01 % @ +4 dBu (1 kHz), GAIN knob: min
(
Hum and noise *2 (20 Hz to 20 kHz)
(
Equivalent input noise
−128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
(
Residual output noise
−103 dBu (MONITOR OUT, MONITOR knob: min)
(
Crosstalk (1 kHz) *3
−80 dB
68
Appendix > General specifications