Yamaha AG03MK2 - Appendix; General Specifications

Appendix
General specifications
AG06MK2
0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω
All level controls are nominal if not specified.
(
Frequency response
(
Input (MIC) → MONITOR OUT via USB IN/OUT
+0.5 dB/−1.5 dB (20 Hz to 48 kHz @ Fs = 192 kHz) with a nominal output level reference @ 1 kHz, GAIN
knob: min, STREAMING OUT: DRY CH 1-2
(
Total harmonic distortion *1 (THD+N)
(
Input to MONITOR OUT
0.05 % @ 0 dBu (20 Hz to 20 kHz), GAIN knob: min
0.01 % @ +4 dBu (1 kHz), GAIN knob: min
(
Hum and noise *2 (20 Hz to 20 kHz)
(
Equivalent input noise
−128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
(
Residual output noise
−103 dBu (MONITOR OUT, MONITOR knob: min)
(
Crosstalk (1 kHz) *3
−80 dB
(
Input channels
Mono (MIC/LINE): 2, including HEADSET MIC (plug-in power;
CH 1 MIC and HEADSET MIC cannot be used simultaneously),
Stereo (LINE): 2, USB IN: 1, AUX INPUT: 1
(
Output channels
STEREO OUT: 1, MONITOR OUT: 1, PHONES: 2 (including HEADSET PHONES;
PHONES and HEADSET PHONES cannot be used simultaneously), AUX OUT: 1
(
Input channel function (CH 1, CH 2)
(
PAD
26 dB
(
DSP
CH1: COMP/EQ, REVERB, MUTE
CH2: COMP/EQ *4, AMP SIM, REVERB, MUTE
(
PEAK LED
LED turns on when the signal reaches 3 dB below clipping level.
(
Level meter
(
USB OUTPUT level
2 x 2 point LED meter [PEAK, SIG]
67
Appendix > General specifications