Yamaha CD-C600 - Component Unit Removal; CM-230 B Unit Removal; PU Mechanism Unit Removal

12
CD-C600
CD-C600
CM-230B unit
9
9
9
9
Push rivets
Barrier cable
Push rivet
Push rivet
Barrier main
CB3CB302CB805, CB851 CB4
CB806
CB306
CB808
PU unit ass'y
10
Fig. 10
Fig. 11
6. Removal of PU Mechanism Unit
a. Remove 2 screws (
⑩
) and then remove the PU unit
ass’y. (Fig. 10)
b. Remove 4 screws (
⑪
) and then remove the PU
mechanism unit. (Fig. 11)
Fig. 8
Fig. 9
5-B. Removal of CM-230B Unit
a. Remove 2 push rivets and remove the barrier main.
(Fig. 8)
b. Remove 2 push rivets and remove the barrier cable.
(Fig. 8)
c. Remove 5 screws (
⑨
). (Fig. 8)
d. Remove CB3–4, CB302, CB306, CB805–806, CB808
and CB851. (Fig. 9)
e. Take the CM-230B unit out slowly. (Fig. 8)
PU mechanism unit
Spring
Spring
11
11