M
mwhiteSep 12, 2025
Why is there noise from inside of the Yamaha CDX-397 CD Player disc tray?
- JJacqueline HurleySep 12, 2025
If you hear noise from inside the disc tray of your Yamaha CD Player, the disc may be warped. Try replacing the disc.
To Next PageTo Next PageWhy is there noise from inside of the Yamaha CDX-397 CD Player disc tray?
If you hear noise from inside the disc tray of your Yamaha CD Player, the disc may be warped. Try replacing the disc.
Why is there no sound from the headphones on my Yamaha CDX-497 CD Player?
If you're not getting any sound from the headphones on your Yamaha CDX-497 CD Player, check if the OUTPUT LEVEL +/– buttons are set at minimum. Adjust the volume using these buttons.
General| Type | CD Player |
|---|---|
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 105 dB |
| Dynamic Range | 96 dB |
| Output Level | 2.0 V |
| Digital Output | Coaxial |
| Power Consumption | 15 W |
| Total Harmonic Distortion | 0.003% (1 kHz) |
Lists important safety instructions for operating the unit.
Warns about laser radiation and electrical shock risks.
Specific guidance for U.K. customers regarding the power plug.
Details on playing MP3 and WMA files and disc compatibility.
Explains the MP3 and WMA audio formats and their specifications.
Instructions for installing and replacing remote control batteries.
Specifies the operating range and potential interference issues for the remote.
Guides on connecting the unit to an amplifier via analog or digital outputs.
Instructions on connecting the unit to the AC power outlet.
Identifies and describes controls on the player's front panel.
Explains the various indicators and information shown on the display.
Identifies the remote control component.
Details the function of each button on the remote control.
Explains how to use numeric and cursor buttons for navigation and input.
Steps to turn on the unit, open/close tray, and load a disc.
How to pause, stop, resume playback and select tracks or files.
How to navigate folders/files and use skip/search functions.
Explains the various display options for audio CDs.
Explains the display options for MP3 and WMA discs.
How to play a single track or selected folder repeatedly.
How to repeat the entire disc playback.
How to set start/end points and cancel the Repeat A-B function.
Steps to program tracks in a desired order for playback.
Explains the information displayed during the programming process.
How to stop, clear, or correct programmed tracks.
How to start playback from an index number and how to cancel the function.
Automatically programs tracks for tape recording based on disc order.
Steps to manually select tracks for Side A of the tape.
Steps to manually select tracks for Side B of the tape.
Programs tracks in random order for tape recording.
How to find the peak audio level for tape recording adjustment.
How to stop the peak level search function.
Steps for synchronizing CD playback with tape deck recording.
How to stop or cancel the CD synchronized recording.
Information on discs compatible with the unit.
Best practices for handling and caring for compact discs.
Warnings against using incompatible or damaged discs.
Solutions for issues like unit not turning on or playback not starting.
Solutions for problems related to sound, skips, hums, and external noise.
Solutions for remote control malfunctions and TV interference.
Technical details of the audio performance.
General power, dimensions, weight, and laser properties.
