Yamaha CDX-E410 - 3.3 Standby (power off); (1) System standby; (2) Unit standby (power off)

CDX-E410
29
CDX-497/CDX-397
CDX-E410
3.3 Standby (power off)
(1) System standby
The power supply through AC outlet of RX is shut down in system standby (power off).
The microcomputer of the unit connected with AC outlet of RX cannot work after system power off.
When there is processing that should be finished before the system power off, the system is turned power off
after such processing completion.
RX unit CD unit
[Power on state] [Power on state]
RX "STANDBY/ON"
key operation
POWER_OFF command
PORT_PRE_STANDBY
Standby process
Standby process
Standby process complete
PORT_STANDBY
Shut down power supply
through AC outlet
Transition process to
standby state
(2) Unit standby (power off)
Each unit can be individually standby (power off) with an individual “STANDBY/ON” key of each unit.
RX unit CD unit
[Power on state]
CD "STANDBY/ON"
key operation
PORT_PRE_STANDBY
Standby process
Standby process complete
PORT_STANDBY