Yamaha CDX-E410 - (3) Auto standby (power off)

CDX-E410
30
CDX-E410
(3) Auto standby (power off)
When 30 minutes pass with the following conditions consisted, the system turns off the power (standby)
automatically.
a. The unit connected with an external bus is in the standby state.
b. RX input function is CD.
c. RX is not operated
CD might turn off the power by own auto standby function.
RX unit CD unit
[Power on state]
PORT_PRE_STANDBY
POWER_OFF command
Standby process
Standby process complete
PORT_STANDBY
[30 min with CD=PORT_PLAY → PORT_STOP,
INPUT=CD, no operation for RX]
Standby process
Shut down power supply
through AC outlet
[The condition of auto standby
for CD ownself consisted.]
CD "STANDBY/ON"
key operation