8
LISTENING TO A SOURCE
1 Set the volume to “MIN” by turning VOLUME.
2 Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
• PianoCraft series components that have correct
system connections made to CRX-E150 can be
controlled to turn into the on or standby mode by
CRX-E150. However, once the connected
components are turned into the standby mode with
their respective STANDBY/ON button, they
cannot be controlled by CRX-E150 STANDBY/
ON button.
3 Select the desired input source by turning INPUT so
that the source appears on the display.
• When you operate the component connected to the
AUX terminal, turn INPUT to select AUX.
4 Play the source. (Refer to the owner’s manual
supplied with each selected component.)
5 Adjust the volume level by turning VOLUME on the
front panel or pressing VOLUME + on the remote
control.
6 If desired, adjust BASS, TREBLE, and BALANCE.
BASS: Turn this control clockwise to increase (or
counterclockwise to decrease) the low frequency
response.
TREBLE: Turn this control clockwise to increase (or
counterclockwise to decrease) the high frequency
response.
BALANCE: Adjust the balance of the output volume
from the left and right speakers to compensate for
sound imbalance caused by the speaker location or
listening room conditions.
When you use headphones
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the main speakers
through the headphones.
When you have finished using this
unit
Press STANDBY/ON on the front panel again or
POWER on the remote control to set this unit to the
standby mode.
• The STANDBY indicator lights up.
Auto standby function
CRX-E150 will be put automatically into the standby
mode under the following conditions:
• CRX-E150 and the components connected to it are in
stop mode and not operated for 30 minutes.
• TUNER or AUX is not selected as an input source.
POWER
VOLUME –/+
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TAP E
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAUSE
TAPE
REC
/
PAUSE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
VOLUME
STANDBY/ON INPUTBALANCE
TREBLE
BASS
PHONES
NATURAL SOUND CD RECEIVER CRX-E150
STANDBY
DISPLAY
BASS
–
+
–
+
L
R
MIN
MIN MAX
HOUR
TIMERTIME ADJ
TREBLE BALANCE
INPUT
VOLUME
MEMORY AUTO/MAN'L PRESET/BAND PRESET/TURING
PHONES
STANDBY/ON
TIMER
This chapter explains the basic operations common to
tuning, playing CD and other connected components.
To Next Page
Loading...
