21
English
L REAR OUTPUT Jacks
Rear-channel line output. Can be connected to input jacks of an
external stereo power amplifier driving the rear speakers.
M MAIN SPEAKERS Terminals
This unit is equipped with 2 sets of MAIN SPEAKERS terminals
to allow you to connect 2 main speaker systems to this unit.
When using this unit’s built-in main-channel amplifier, connect
the main speakers here. The jumper bars must be plugged in to
connect the MAIN IN jacks to the PRE OUT jacks.
N IMPEDANCE SELECTOR Switch
Select the position whose requirements your speaker system
meets.
O SWITCHED AC OUTLET(S)
You may plug other audio/video units into these sockets as long
as their combined power consumption does not exceed the
specified value shown. “Switched” means that these
components are turned on and off by this unit’s power switch.
To Next Page
Loading...
Need help?
General