28
Connecting the indoor FM antenna
Connect the included indoor antenna to the 75Ω UNBAL. FM
ANT terminal.
NOTE
If you connect an outdoor FM antenna to this unit, do not connect
the indoor FM antenna to this unit.
Connecting the AM loop antenna
1. Press the tab and unlock the terminal hole.
2. Connect the AM loop antenna lead wires to the AM ANT and
GND terminals.
3. Return the tab back to the original position to lock the lead
wires. Lightly pull on the lead wires to confirm a good connection.
4. Attach the loop antenna to the antenna stand.
5. Tune to an AM station and then position the loop antenna for
best reception. Orient the AM loop antenna so that the best
reception is obtained.Try other stations, and find the position that
gives the best overall reception.
NOTES
● The AM loop antenna should be placed apart from the main
unit.The antenna may be hung on a wall.
● The AM loop antenna should be kept connected, even if an
outdoor AM antenna is connected to this unit.
To Next Page
Loading...
Need help?
General