Do you have a question about the Yamaha DSP-A1092 and is the answer not in the manual?
Type | AV Receiver |
---|---|
Channels | 5.1 |
Power Output | 100 W |
Power output per channel | 100W (8 ohms, 20Hz-20kHz, 0.015% THD) |
Frequency Response | 20 Hz - 20 kHz |
Total Harmonic Distortion | 0.015% |
Input Sensitivity | 200 mV |
Speaker Load Impedance | 8 ohms |
Surround Sound Formats | Dolby Pro Logic, Dolby Digital, DTS |
Tuner Section | AM/FM |
Digital Inputs | Optical, Coaxial |
Video Inputs | 4 Composite, 1 S-Video |
Video Outputs | 2 Composite, 1 S-Video |
Dimensions inches | 17 x 6 x 14 |
Analog Outputs | Tape |
Lists all included accessories with the unit.
Guide for inserting batteries into the remote control.
Details effective range, angles, and usage tips.
Explains Yamaha's DSP technology for immersive audio.
Details Dolby Pro Logic decoding for movie theater sound.
Explains multi-channel digital audio technology.
Recommends speaker setups and explains options.
Importance of center speaker and subwoofer for sound.
Numbered overview of front panel controls.
Explains power switch, standby indicator, and sensor.
Explains input selectors, DSP buttons, and volume.
Explains speaker switches and bass extension.
Explains tone, balance, tuning, and memory controls.
Explains delay/level switches, SET MENU, and preset buttons.
Shows input source, station frequency, and DSP programs.
Connects antennas and digital audio sources.
Connects audio/video sources and speakers.
Connects for system control and speakers.
Details PRE OUT, MAIN IN, SUBWOOFER, and other jacks.
Explains FRONT MIX and MAIN LEVEL switches.
Connects main speakers and sets impedance.
Configures rear panel switches like MAIN LEVEL.
Advice on cable polarity and connections.
Sets center/rear speaker output modes (NRML, SMALL, etc.).
Guides for automatic and manual station tuning.
Stores and recalls stations manually.
Automatically tunes and stores FM stations.
Explains Dolby Pro Logic and Enhanced programs.
Explains Movie Theater, TV Sports, and Disco DSP programs.
Describes various acoustic environment DSP programs.
Explains functions accessible with the lid open.
Keys that can have three functions via memory areas A, B, C.
Procedures to clear learned functions or all data.
Addresses problems with power, hum, and no sound.
Technical details for audio output and sensitivity.