55
English
CANCELING THE EFFECT SOUND
The EFFECT switch on the front panel and the EFFECT ON/OFF
key on the remote control unit make it simple to compare the normal
stereo sound with the fully processed effect sound.
To cancel the effect sound and monitor only the main sound,
press the EFFECT ON/OFF key or the EFFECT switch. Press the
EFFECT ON/OFF key or the EFFECT switch a second time to
restore normal operation.
NOTES
• If the effect sound is canceled when signals encoded with the
Dolby Digital (AC-3) are input to this unit, signals of all channels
are mixed and are output from the main speakers.
• If the EFFECT switch or the EFFECT ON/OFF key is pressed to
turn effect sounds OFF when the Dolby Digital (AC-3) is decoded,
it may happen that sound is output faintly or not output normally
depending on a source. In that case, press the EFFECT switch or
the EFFECT ON/OFF key to turn effect sounds ON, or use input
signals not encoded with the Dolby Digital (AC-3).
Front panel
or
Remote control
To Next Page
Loading...
Need help?
General