53
English
NOTES
• You can replace a preset station by another FM or AM station
manually by simply following the procedure of the section “To
store stations” on page 51.
• If the number of received stations is not enough to be stored up
to E8, the search is finished automatically after searching all
frequencies.
• With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune in to it with the
MANUAL TUNING method (in monaural) and program it by
following the procedure of the section “To store stations” on
page 51.
EXCHANGING PRESET STATIONS
You can exchange the places of two preset stations with each
other as shown below.
Example)
If you want to shift the preset station on E1 to A5, and vice versa.
1. Recall the preset station on E1 (by following the method of “To
recall a preset station” on page 51).
2. Press the EDIT button.
3. Next, recall the preset station on A5 by following the same
method with step 1.
4. Press the EDIT button.
Flashes.
To Next Page
Loading...
Need help?
General