37
English
METHOD OF CHANGING SELECTIONS
Operations should be made watching information on this unit’s
display panel or the monitor screen.
1. Turn the power of this unit on. (If you want to display
information on the monitor, turn the power of the monitor on.)
If you will use the remote control unit, set the TIME/LEVEL·SET
MENU switch to the SET MENU position on the remote control
unit.
NOTE: Be sure to use the remote control unit with the lid open.
2. Press once or more until “4. CENTER SPEAKER” appears on
the display.
3. Press “+” or “–” once or more so that the arrow points the
position you will select.
4. Press once or more until the title of another function on which
you will change the selection appears on the display.
5. Press “+” or “–” once or more so that the arrow points the
position you will select.
6. Repeat step 4 and 5 to change selections on other functions in
the same way.
Front panel
Front panel
or
Remote control
Remote control
Front panel
or
Remote control
To Next Page
Loading...
Need help?
General