DSP-AX2
DSP-AX2
15
FULL BIT [Remote control code: 7A—10 (TUNER PRESET +)]
• The head margin is unused and the digital data is output in full bit.
• The same applies as “0dB” except that the digital data is output in full bit at D/A but SWFR is
not output in full bit.
2. HP ROUTE
FULL BIT
(In the case of multi-ch source)
• AC3D3 outputs signals using DOLBY DIGITAL/dts decode operation.
SWFR
RL
RR
FL
FR
C
RC
L
R
FILTER
DF1704
FILTER
DF1704
FILTER
DF1704
D/A
PCM1704
D/A
PCM1704
D/A
PCM1704
CODEC
(D/A)
AK4527
L/R
L/R
C
LFE
L/R
LS/RS
SDOA0
SDOB0
SDOB1
SDOB2
SDOB3
CODEC
(A/D)
AK4527
DIR
DD/dts
DECODER
MAIN
DSP
(Decoder)
SUB DSP
DIGITAL
ANALOG
AC3D3 YSS928
4M DRAM
LS/RS
C/LFE
L/R
Note: (SDOxx) represents a terminal name of AC3D3.
The shaded square ( ) means that the element included in it does not operate.
Condition
Both ch, -20 dBV, volume -20dB
MAIN L/R
-5.5 dBV
CENTER
– ∞ dBV
REAR C
– ∞ dBV
SWFR
– ∞ dBV
REAR L/R
– ∞ dBV
FRONT L/R
– ∞ dBV
Reference (PRE OUT)
INPUT : DVD ANALOG
SWFR: 50Hz, Others: 1kHz
To Next Page
Loading...
Need help?
General
