39
Listening to the Radio
Listening to the Radio
English
Listening to the Radio
CinemaStation provides several methods for tuning radio stations to help you
find channels as easy as you can.
INPUT
Press PRESET/BAND to select either FM or AM.
Each time you press, the mode changes in the order as
follows: FM (Tuning mode) → AM (Tuning mode) →
(Preset mode) → FM (Tuning mode) → ...
PRESET/BAND
AUTO/MAN’L
d PRESET/TUNING
PRESET/TUNING u
Selecting the Radio Tuner
Press INPUT repeatedly on CinemaStation until TUNER
appears. The input source changes to Tuner (Radio) and
you can listen to AM/FM broadcasts.
• You can also press TUNER on the Remote Control to change the input
source to Tuner.
Advice
Display
Selecting Radio Stations
You have two ways to select radio stations, Auto Tuning
and Manual Tuning. Auto Tuning is quick and handy to use
when radio signal reception is strong.
Select stations automatically (Auto Tuning)
• If the colon (:) beside the Band indicator goes out, that means
CinemaStation is in Tuning mode. Make sure the colon (:) is not lit
up.
Advice
Press AUTO/MAN’L to set CinemaStation to Auto
Tuning mode.
When CinemaStation is set to Auto Tuning mode, the
AUTO indicator lights up in the CinemaStation Display.
Press PRESET/TUNING u/d to select the radio
station you want to receive.
Press u to search for high-frequency stations or press d
to search for low-frequency stations.
Display
Preset number Band
Preset
group
Colon* Frequency
* Goes out in Tuning mode, lights up in Preset mode.
010DVX-S200-en 03.10.24, 11:06 AM39
To Next Page
Loading...
