Yamaha E15D - Adjusting Trim Angle

E
3-15
503012
N
F
310013
406035
N
F
8D, 9.9D, 15D 9.9F, 15F
402034
402014
8D, 9.9D, 15D 9.9F, 15F
310014
R
N
406036
R
N
8D, 9.9D, 15D 9.9F, 15F
EMU02610
SHIFTING
w
Before shifting, make sure there are no
swimmers or obstacles in the water near
you.
cC
To change the shifting position from for-
ward to reverse or vice-versa, close the
throttle first so that the engine idles (or
runs at low speeds).
EMU02630
FORWARD
1) Place the throttle control grip in the fully
closed position.
2) Turn the gear shift lever quickly and
firmly from Neutral to Forward.
EMU02680
REVERSE
w
When operating in Reverse, go slowly.
Do not open the throttle more than half.
Otherwise, the boat may become unsta-
ble, which could result in loss of control
and an accident.
1) Place the throttle control grip in the fully
closed position (for Tiller control
model).
2) Check that the tilt-lock lever (for Manual
tilt model) is in the locked position.
3) Turn the gear-shift lever quickly and
firmly from Neutral to Reverse.
63V-9-K2-A0-3B 3/3/03 5:11 PM Page 2