– 19 –
3. Turn the engine switch to “START”.
Take your hand off the switch immediately after
the engine starts.
1 6 “START”
cC
If the engine fails to start, release the switch, wait
a few seconds, then try again. Each attempt
should be as short as possible to preserve the bat-
tery. Do not crank the engine more than 10 sec-
onds on any one attempt.
2. Turn the engine switch to the “ON” position.
1 7 “ON”
B
Manual Starting
(for YG5200D)
NOTE:
Turn the AC switch (N.F.B.) and economy control
switch to the “OFF” position.
1 3 “OFF”
å AC switch (N.F.B.)
∫ Economy control switch
A
7CB-F8199-11_a 07.12.22 16:30 Page 19
Downloaded from ManualsNet.com search engine