– 26 –
705-038d
33
5. Turn the fuel cock lever to OFF.
3 OFF
1
000-000
2
Connection
Alternating current (AC)
WARNING
Be sure any electric devices are turned off before
plugging them in.
NOTICE
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
1. Start the engine.
2. Plug into AC receptacle.
3. Make sure the voltage/hour meter indicates the
rated voltage.
If the voltage/hour meter does not indicate the
rated voltage (i.e., when using an extension cord,
etc.), use the voltage adjuster to adjust the output
voltage to the rated voltage.
1 Voltage/hour meter
TIP
Turn the voltage adjuster clockwise or counterclock-
wise to increase or decrease output voltage.
2 Voltage adjuster
000-000
7P6-F8199-13.indd 26 2019/12/11 9:57:26
To Next Page
Loading...
