Operation
62
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
3. Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
4. Turn the main switch to “ ” (on).
Dual engine users: When the main switch is
turned on, the buzzer operates for a few sec-
onds then stops automatically. The buzzer
also operates if one of the engines stalls.
5. Turn the main switch to “ ” (start),
and hold it for a maximum of 5 seconds.
6. Immediately after the engine starts, re-
lease the main switch to return it to “ ”
(on). NOTICE: Never turn the main
switch to “ ” (start) while the en-
ON
STARTOFF
ON
STARTOFF
ZMU04589
U63P3GE0.book Page 62 Monday, December 15, 2014 2:02 PM
©2019 Yamaha Motor Corporation, U.S.A.