3-14
E
EMU00273¯
STOPPING ENGINE
EMU01737
1) Place the throttle control grip in the fully
closed position.
2) Place the gear-shift lever in the neutral
position.
3) Push and hold the engine stop button
until the engine comes to a complete
stop.
4) After stopping the engine, set the fuel
cock to the closed position.
5) Tighten the air vent screw(s) on the fuel
tank cap(s).
NOTE:
@
The engine can also be stopped by pulling
the lanyard and removing the lock plate from
the engine stop lanyard switch.
@
To Next Page
Loading...
