Trouble Recovery
101
3. Prepare the engine for starting. For fur-
ther information, see page 55. Be sure
the engine is in neutral and that the clip
is attached to the engine shut-off switch.
4. Turn on the main switch.
5. Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope around the fly-
wheel several turns clockwise.
6. Give a strong pull straight out to crank
the engine. Repeat if necessary.
WARNING! Do not install the top
cowling when engine is running.
[EWM00621]
6C1-9-26-1E0.book 101 ページ ２０１０年２月１０日 水曜日 午後１時５３分
To Next Page
Loading...
