Name: Yamaha FZ6
Brand: Yamaha
Rating: 5 (1 reviews)

To Next Page

To Previous Page

PERIODIC MAINTENANCE AND MINOR REPAIR

6-39

EAU24310

Replacing the license plate

light bulb

1. Remove the license plate light unit

by removing the screws.

2. Remove the socket (together with

the bulb) by pulling it out.

3. Remove the defective bulb by pull-

ing it out.

4. Insert a new bulb into the socket.

5. Install the socket (together with the

bulb) by pushing it in.

6. Install the license plate light unit by

installing the screws.

EAU24360

Front wheel

EAU43090

To remove the front wheel

WARNING

EWA10820

● It is advisable to have a Yamaha

dealer service the wheel.

● Securely support the motor-

cycle so that there is no danger

of it falling over.

1. Place the vehicle on the center-

stand.

2. Loosen the front wheel axle pinch

bolt, then the wheel axle and the

brake caliper bolts.

1. Screw

2. License plate light unit

1. License plate light bulb

2. License plate light bulb socket

1. Wheel axle

2. Front wheel axle pinch bolt

U4S811E0.book Page 39 Wednesday, August 8, 2007 1:14 PM

Questions and Answers:

Need help?

Do you have a question about the Yamaha FZ6 and is the answer not in the manual?

Yamaha FZ6 Specifications

General