What does CHECK SP WIRES mean on Yamaha HTR-5280?
If “CHECK SP WIRES” appears on the front panel display of your Yamaha Receiver, it indicates that speaker cables are short-circuited. Make sure all speaker cables are connected correctly.
General| Channels | 5.1 |
|---|---|
| Power Output | 100W per channel (8 ohms, 20Hz-20kHz, 0.09% THD) |
| Frequency Response | 10 Hz - 100 kHz |
| Input Impedance | 47 kOhms |
| Dimensions (W x H x D) | 17-1/8" x 6-3/8" x 15-3/4" |
| Weight | 20.5 lbs |
| Type | AV Receiver |
| Total Harmonic Distortion | 0.08% |
| Signal to Noise Ratio | 100 dB |
| Input Sensitivity/Impedance | 200 mV/47 kOhms |
| Signal-to-Noise Ratio | 100 dB |
| Input Sensitivity | 200 mV |
| Digital inputs | 2 x Optical, 2 x Coaxial |
| Video Inputs | 2 S-video |
| Video Outputs | 1 composite, 1 S-video |
| Surround Sound Formats | Dolby Digital, DTS |
| Surround Sound | Dolby Digital, DTS |
| Audio Inputs/Outputs | 6 analog audio inputs |
| Output Power | 100W per channel (8 ohms, 20Hz-20kHz, 0.09% THD) |
| Amplifier | Built-in |
| Video Inputs/Outputs | 3 composite, 2 S-video inputs; 1 composite, 1 S-video output |
Explains the meaning of symbols used in safety instructions.
Highlights critical safety warnings to prevent hazards like fire or electric shock.
Provides essential precautions for safe and proper operation to prevent damage or injury.
Lists all items included in the product package for user verification.
Guides users on how to insert batteries into the remote control correctly.
Details the buttons and indicators on the unit's front panel for basic operation.
Explains the functions of the remote control and its buttons for convenient operation.
Describes the indicators and information shown on the unit's front panel display.
Illustrates and describes all the input/output jacks and terminals on the rear of the unit.
Recommends using speakers of the same manufacturer for optimal sound quality.
Provides diagrams and guidelines for optimal placement of main, center, and rear speakers.
Emphasizes completing all connections before powering up the unit and its components.
Details how to connect various audio sources using digital and analog jacks.
Explains how to connect video sources using composite, S-video, and component video jacks.
Provides instructions on connecting speaker cables to the unit's terminals, ensuring correct polarity.
Guides on connecting an external amplifier to the unit's output jacks for increased power.
Explains how to connect external decoders using the 6CH INPUT jacks for multi-channel audio.
Instructions on connecting AC power cords and using the switched AC outlets for component power.
Explains how to change the display mode (full, short, off) for on-screen information.
Summarizes the 5 SPEAKER SET items for configuring speaker size and output modes.
Details how to use the test tone generator to balance speaker output levels for optimal surround sound.
Explains how to select sources connected to the 6CH INPUT jacks and its implications.
Guides users on selecting and applying various DSP sound field programs to enhance audio experience.
Explains how to enable the Dolby Digital Matrix 6.1 or DTS ES decoder for advanced surround sound.
Describes how to activate Virtual CINEMA DSP and SILENT CINEMA DSP for enhanced surround effects.
Provides instructions for connecting AM and FM antennas for optimal reception.
Explains how to use automatic and manual tuning methods to select radio stations.
Details how to automatically and manually preset FM/AM stations for easy recall.
Explains how to swap the assignments of two preset radio stations.
Provides specific notes and adjustments for recording sources with DTS signals.
Guides users through accessing and adjusting various settings via the SET MENU.
Allows selection of output modes based on speaker configuration and subwoofer usage.
Configures the center speaker output mode, choosing between Large, Small, or None.
Sets the output mode for main speakers, choosing between Large or Small based on size.
Configures the rear speaker output mode, choosing between Large, Small, or None.
Selects the output destination for LFE and low-frequency signals, including subwoofer or main speakers.
Adjusts the output level of main speakers to match effect speakers if performance differs.
Guides on adjusting subwoofer output level using a test tone to match other speakers.
Adjusts the output level balance between the left and right main speakers.
Allows adjustment of bass and treble levels specifically for headphone usage.
Provides a 5-band graphic equalizer to match center speaker tone quality with main speakers.
Enables changing the names of input sources displayed on the OSD or front panel.
Assigns specific input sources to component and digital jacks for flexible connectivity.
Designates the preferred input mode (AUTO, LAST) for digital sources when powering on.
Resets DSP program parameters within a group to their factory default settings.
Adjusts Dolby Digital specific settings like LFE level and dynamic range.
Adjusts the output level of the LFE channel for DTS signals, considering subwoofer or headphone capacity.
Switches the Dolby Digital Matrix 6.1 or DTS ES decoder between automatic and manual modes.
Adjusts the delay time for the center channel sound to improve dialog localization and synchronization.
Allows customization of OSD background, position, and front panel display brightness.
Protects settings from accidental changes by locking DSP parameters and other configurations.
Explains how to set the unit to automatically switch to standby mode after a specified time.
Details the procedure for canceling the sleep timer function.
Describes the selector dial positions for controlling various components with the remote.
Lists buttons that function universally, controlling the unit or TV regardless of selector dial position.
Provides examples on how to control connected components like CD players using the remote.
Details the functions of specific buttons depending on the selector dial position.
Guides on setting manufacturer codes to enable remote control of various audio/video components.
Explains how to teach the remote control new functions from other remote controls.
Describes how to reset the remote control to its original factory-set codes and learned functions.
Explains how to set up a multi-room audio system by connecting Zone 2 components.
Describes various DSP programs for enhancing audio sources with acoustic environments.
Details DSP programs designed to enhance audio-video sources, creating cinematic sound fields.
Explains Movie Theater DSP programs that recreate spaciousness and realism for movie soundtracks.
Explains the concept of sound fields and the role of reflections in acoustic perception.
Describes direct sound, early reflections, and reverberations that constitute a sound field.
Discusses parameters that define acoustic environments and allows customization of sound fields.
Guides users on how to adjust DSP program parameters to customize the sound field.
Provides solutions for common problems related to the remote control's functionality.
Offers troubleshooting steps for issues related to FM and AM reception and tuning.
Lists technical specifications for the unit's audio output power, frequency response, and input sensitivity.
Provides general specifications such as power supply, consumption, dimensions, and weight.
Details specifications related to the FM tuner, including tuning range and sensitivity.
Details specifications related to the AM tuner, including tuning range and sensitivity.
Outlines the warranty coverage, detailing what defects are included and excluded.
Provides instructions on how to obtain warranty service for the product.
Details limitations on liability for incidental or consequential damages.
States that implied warranties are limited to the duration of this express warranty.
To Next Page
