Need help?Do you have a question about the Yamaha HTR-5835 and is the answer not in the manual?
General| Audio Channels | 5.1 |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| THD | 0.06% |
| Signal-To-Noise Ratio | 100 dB |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Audio D/A Converter | 24-bit/192 kHz |
| Built-in Decoders | Dolby Digital, DTS |
| Surround Sound Effects | Yes |
| Digital Sound Processor (DSP) | Yes |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Tuning Range | AM: 530 - 1700 kHz, FM: 87.5 - 108 MHz |
| Digital Audio Inputs | 2 optical, 1 coaxial |
Covers numbered safety instructions for operation, cleaning, and usage.
Specific cautions regarding risk of electric shock and user-serviceable parts.
Essential steps and conditions for operating the unit safely and correctly.
Specific warnings about exposure to rain, moisture, and electrical hazards.
Recommended positioning for front, center, and surround speakers.
Instructions for connecting speaker wires and using banana plug connectors.
Diagram showing speaker and subwoofer terminals on the rear panel.
Using the BASIC SETUP menu for quick system configuration.
Fine-tuning individual speaker output levels after initial setup.
Procedures for automatic and manual tuning of radio stations.
How to automatically and manually save favorite radio stations.
Using unit controls, basic operations, and various search modes.
Understanding and resolving common status and error messages.
Fine-tuning the output level for each individual speaker.
Adjusting speaker size, bass output routing, and crossover frequency.
Setting speaker delays, center channel EQ, LFE level, and dynamic range.
Addresses power, sound, and general operational problems.
Details issues with sound output, tuner reception, and remote control.
Procedure to reset all parameters to their original factory defaults.
To Next Page
